Export Oil and Gas Pipeline Explosion-Proof Oil-Resistant Paint Epoxy Electrostatic Conductive Anti-Corrosion Primer

• Customization: Available
• Usage: Conduct Static Electricity
• Color: Color Adjustable
• Model NO.: Epoxy Electrostatic-primer. 2
• Appearance: Liquid
• Method: Spray/Roller/Brush
• Main Raw Material: Special Epoxy Resin
• Level: Primer
• Certification: ISO9001, ISO9000
• Substrate: Chemical Storage Tank Inner Wall
• Expiration Date: 1 year
• Formation Mechanism: Conversion Type
• Packaging: Iron Drum
• Substrate Temperature: Above 3ºC
• Ventilation: 1kg Paint or Ventilation Volume
• Matching Paint for Front Road: Epoxy Electrostatic Conductive Intermediate Paint
• Storage Environment: Indoor Ventilated Dry and Cold Place
• Specification: Main Paint 25KG + Curing Agent 2.5KG
• Trademark: Ayrood
• Origin: Jining, Shandong, China
• Production Capacity: 5000tons/Year

Product Description

Export Oil And Gas Pipeline Explosion-proof Oil-resistant Paint
Epoxy Electrostatic Conductive Anti-corrosion Primer

We use paint packaging cans imported from Germany, transport will be free for you to strengthen the packaging, to ensure that the product is transported to your hands is the most perfect state, and our packaging design is exquisite, excellent workmanship, the quality of the product itself is excellent, so the products are exported to dozens of countries and regions.

 

Design  Usage

1. Suitable for coatings with high anti-corrosion performance requirements on steel or concrete floors that require electrostatic conductivity.

2. Such as: the inner walls of storage tanks for petrochemical products and chemicals can also be used for ground electrostatic coating.
 

Design  Feature

1. Excellent static conductive properties;
2. Cathodic protection for steel surfaces;
3. Excellent chemical resistance;
4. The paint film is hard, wear-resistant and collision-resistant;
5. Strong adhesion to steel and concrete surfaces.
  

Product Composition

 

Special epoxy resin + pigment + filler + advanced conductive material + solvent + additives, etc.
 

Technical Indicators

 

Item	Index
Color	Various Colors
Viscosity	(15.25±1ºC) 80 ≤ s ≤ 100
Solid content	≥ 50%
Adhesion	Level 1
Flexibility	1mm
Impact resistance	≥ 50 (kg·cm)
Hardness	≥ 0.5 (double pendulum)
Surface Resistivity	≤ 109Ω
Volume Resistivity	105-108 (Ω·m)
Heat Resistance	160ºC-180ºC
Minimum Curing Temperature	10ºC

 

Construction Parameters

 

Item	Index
Component	Two components A and B
Weight Ratio	A : B = 4 : 1
Theoretical Coating Rate	4-5m^2/kg (Average value, smooth surfaces are not included in the loss)
Paint Film Thickness	WFT	175μm
	DFT	80μm
Applicable Time (25ºC)	3h
Aging Time (25ºC)	0.5h
Drying time (25±1ºC)	Surface drying	8h
	Actual drying	24h
	Fully cured	7d

 

Re-coating Interval

 

Temperature	20ºC
Shortest re-coating interval	2h
Longest re-coating interval	no limit (If the time is too long, use sandpaper to polish)

 

Decorate Method

 

Airless spraying	Diluent	103diluent
	Dilution Amount	0-5% (Calculated by weight of paint)
	Nozzle Diameter	0.4-0.5mm
	Ejection pressure	15-20MPa (About 150-200kg/cm^2)
Air Spraying	Diluent	103diluent
	Dilution Amount	0-15% (Calculated by weight of paint)
	Nozzle Diameter	2.0-3.0mm
	Air pressure	0.3-0.4MPa (About 3-4kg/cm^2)
Roller / Brush	Diluent	103diluent
	Dilution Amount	0-15% (Calculated by weight of paint)
	Cleaning Agents	HA103diluent

 

Surface Treatment

1. Steel with oxide scale: processed to Sa2.5 level by shot blasting or sand blasting. Where sandblasting is not possible, it should be mechanically sanded or chemically treated to remove all floating debris and leave the surface clean, dry, rust-free, and dust-free.

2. Steel without scale: Use pneumatic or electric elastic grinding wheel to grind to St3 level.

3. Steel coated with shop primer: Light blasting or secondary derusting with pneumatic (power) tools to St3 level.

4. The surface after rust removal cannot be touched by hand and should be painted as soon as possible, with an interval of no more than two hours. If contamination or rust is found before painting, it should be reprocessed to meet the rust removal grade standards.
 

Something Else

 

Paint	Reach LEL10% 58m^3
	Reach TLV 3150m^3
Thinner	Reach LEL10% 170m^3
	Reach TLV 9500m^3

 

Safety Matters

1. Proper ventilation of the construction site;
2. Fireworks are strictly prohibited in the construction site and adjacent areas;
3. Use explosion-proof electrical equipment;
4. Metal impact is strictly prohibited;
5. Prevent static accumulation;
6. Wear necessary protective equipment;
7. Avoid inhaling paint mist, avoid skin contact with paint and thinner, etc;
8. If the eyes are accidentally splashed with paint, wash with plenty of water and seek medical attention;
9. Properly dispose of empty paint drums and remaining paint to avoid environmental pollution;
10. Take all other necessary safety and fire control measures according to the specific situation on the scene.
 

Sharing Photos

 

FAQ

Q1: What payment do you accept?
A: Generally, we accept T/T . Other terms can also be negotiable.

Q2: Are you a manufacturer or trading factory?
A: We the professional paint manufacturer and have our factory.

Q3: If the OEM is accepted? 
A: Yes, we support OEM order. Brand,Logo & Packing Size all can be customized anti-rust prime

Q4: Can we visit your factory?
A: You are warmly welcomed to visit our factory, it would be our great pleasure.