Pollution-Free, Conductive and Non-Oozing Coating Paint 036-2 Oil-Resistant Electrostatic Conductive Anti-Corrosion Paint

• Usage: Conduct Static Electricity
• Color: Grey
• Appearance: Liquid
• Method: Spray/Roller/Brush
• Main Raw Material: Epoxy
• Level: Primer
• Model NO.: 036-2.2
• Certification: ISO9001, ISO9000
• Substrate: Chemical Storage Tank Inner Wall
• Expiration Date: 1 year
• Formation Mechanism: Conversion Type
• Packaging: Iron Drum
• Executive Standard: Q/Bla104-2010
• Mixed Weight Ratio: a : B=5:1
• Substrate Temperature: Above 3ºC
• Storage Environment: Indoor Ventilated Dry and Cold Place
• Total Solid Content: ≥75%
• Surface Dry: ≤1h
• Divided by Solvent Type: Oil Paint
• Function: Corrosion/Rust/Alkali and Weather Resistance
• Product Use: Oil Pipeline/Tank Inside and Outside Walls
• Shelf Life: 1year
• Specification: Main Paint 20KG + Curing Agent 4KG
• Trademark: Ayrood
• Origin: Jining, Shandong, China
• Production Capacity: 5000tons/Year

Product Description

Pollution-free, Conductive and Non-oozing Coating Paint
036-2 Oil-resistant Electrostatic Conductive Anti-corrosion Paint

We use paint packaging cans imported from Germany, transport will be free for you to strengthen the packaging, to ensure that the product is transported to your hands is the most perfect state, and our packaging design is exquisite, excellent workmanship, the quality of the product itself is excellent, so the products are exported to dozens of countries and regions.

Design  Usage

1. The inner walls of storage tanks for petrochemical products and chemicals.

2. Inner wall of finished oil storage tanks (especially aviation kerosene) in refineries and oil product stations.

 

Design  Feature

1. Excellent static conductive properties;
2. Cathodic protection for steel surfaces;
3. Excellent chemical resistance;
4. The paint film is hard, wear-resistant and collision-resistant;
5. Strong adhesion to steel and concrete surfaces.

   

General description of construction

  
Surface treatment:
Electrostatic conductive anti-corrosive coating requires surface sandblasting treatment, rust removal grade should reach GB/T8923 specified Sa2 level, the treated surface should be coated with primer within 24 hours.

Construction environment:
Water, sand, cotton and other foreign bodies are strictly prohibited in the paint during construction. In case of wind, sand, rain, snow and fog, the construction should be stopped to ensure the quality of the coating.

Coating color preparation:
Before use, the two components A and B should be fully stirred respectively, and then the construction can be evenly stirred. When conditions are available, it is recommended to do a small sample for matching test.

Construction method:
1. Electrostatic conductive anti-corrosive coating can be used by ordinary spraying, high pressure airless spraying, brush coating and other processes.
2.Paint construction trial period is generally not more than four hours, when the temperature is high, the construction trial period will be shortened accordingly, should be used now.
3. The previous coating can be applied to the next one when the surface is dry, and the spray gun, feed pipe, paint brush, etc. should be cleaned with solvent in time after the construction is completed, so as to avoid the residual coating curing and affecting the next use.

Thinner:
When the viscosity of the paint is too large, it can be diluted by the special diluent produced by our company, and the dosage should not exceed 5% of the paint amount.

Coating structure:
1. It is recommended to use one bottom and three sides coating structure, the coating amount is 0.8-1.0kg/m², and the total thickness of the coating dry film is 200-220um. A finish can be added to the special weight area.
2. Below 10ºC, maintenance 7-10 days; 10-30ºC curing 5-7 days; Above 30ºC, curing for 3-5 days.
 

Surface Treatment

1. Steel with oxide scale: processed to Sa2.5 level by shot blasting or sand blasting. Where sandblasting is not possible, it should be mechanically sanded or chemically treated to remove all floating debris and leave the surface clean, dry, rust-free, and dust-free.

2. Steel without scale: Use pneumatic or electric elastic grinding wheel to grind to St3 level.

3. Steel coated with shop primer: Light blasting or secondary derusting with pneumatic (power) tools to St3 level.

4. The surface after rust removal cannot be touched by hand and should be painted as soon as possible, with an interval of no more than two hours. If contamination or rust is found before painting, it should be reprocessed to meet the rust removal grade standards.
 

  

Safety Matters

1. Proper ventilation of the construction site;
2. Fireworks are strictly prohibited in the construction site and adjacent areas;
3. Use explosion-proof electrical equipment;
4. Metal impact is strictly prohibited;
5. Prevent static accumulation;
6. Wear necessary protective equipment;
7. Avoid inhaling paint mist, avoid skin contact with paint and thinner, etc;
8. If the eyes are accidentally splashed with paint, wash with plenty of water and seek medical attention;
9. Properly dispose of empty paint drums and remaining paint to avoid environmental pollution;
10. Take all other necessary safety and fire control measures according to the specific situation on the scene.
 

Company Introduction

 

FAQ

Q1: What payment do you accept?
A: Generally, we accept T/T . Other terms can also be negotiable.

Q2: Are you a manufacturer or trading factory?
A: We the professional paint manufacturer and have our factory.

Q3: If the OEM is accepted? 
A: Yes, we support OEM order. Brand,Logo & Packing Size all can be customized anti-rust prime

Q4: Can we visit your factory?
A: You are warmly welcomed to visit our factory, it would be our great pleasure.