Excellent Weather Resistance Medium Grey Chlorinated Rubber Anticorrosive Topcoat (outdoor) Supplied by Chinese Manufacturers

• Customization: Available
• Appearance: Liquid
• Main Raw Material: Modified Chlorinated Rubber
• Model NO.: Chlorinated Rubber-top. gray. outdoor
• Method: Spray
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO9001, ISO9000
• Substrate: Steel
• Formation Mechanism: Non Conversion Type
• Painting Method: Spray
• Substrate Temperature: Greater Than 3ºC
• Implementation Standards: Q/320507ycd06-2011
• Storage Life: 1 Year
• Transport Package: Barrel
• Specification: 20KG
• Trademark: Ayrood
• Origin: Jining, Shandong, China
• Production Capacity: 5000tons/Year

Product Description

Design  Usage

It is mainly used in the surface coating of steel structure and concrete structure anti-corrosion coating system under normal conditions.
 

Applicable scene	Ship Waterline
	Ship Hull
	Superstructure and Power Plant
	Steel Plant and Wharf Steel Structure
	Chemical Plant
	Bridge
	Container

 

Design  Feature

 

1. Anticorrosive and Antioxidant;

2. Acid and Alkali Resistance Salt Fog Resistance;

3. Strong Adhesion;

4. Good Supporting Facilities;

5. Quick Drying of Paint Film Curing at Room Temperature; 

6.The permeability of water vapor and oxygen to the film is low.

 

 

 

 

Product Composition

Modified chlorinated rubber + pigment (anti-corrosive pigment + coloring pigment)+ additive + solvent
, etc.
 

Construction Parameter

 

Item	Index
Density	About 1.20g/cm^3
Volume solid	43±3% (after mixing)
Wet Film Thickness (WFT)	50µm
Theoretical dosage	150g/m^2
Actual dosage	Spraying	260g/m^2
	Brushing	200g/m^2
Drying Time	Natural drying (23ºC)	Surface drying ≤ 4h
		Actual Dry ≤ 24h
	Stoving (work-piece surface temperature is 70±2ºC)	60min

 

Re-coating Interval

 

Shortest re-coating interval (23ºC)	12h
Longest re-coating interval	no limited

 
Notice! ! !

Long re-coating interval: No limited, but, before painting the next paint, the necessary surface treatment must be made to make the paint film clean and dry, otherwise it will affect the inter-layer adhesion and protection effect.
 

Decorate Method

 

Airless spraying	Nozzle Diameter	0.4-0.5mm
	Ejection pressure	12-15MPa (About 120-150kg/cm^2)
Air Spraying	Nozzle Diameter	2.0-3.0mm
	Air pressure	0.3-0.6MPa (About 3-6kg/cm^2)
Roller / Brush	Large area construction is not recommended.

Notice! ! !
1. Surface treatment:
The front coating is required to be dry, clean and uniform.

2. Temperature and humidity requirement:
The substrate temperature is 5-50ºC and must be 3ºC above the dew point. The relative humidity is not more than 85%.
 

Matching Paint

 

Front matching primer	Zinc-rich primer
	Epoxy iron red primer
	Cloud iron intermediate paint

 

Precautions

1. When using, you should carefully see the model, batch number, color and weight of the product, and use the same batch number as far as possible for the same area or the same batch of components to ensure that the appearance is completely consistent.

2. The paint should be fully stirred and evenly mixed when used.

3. Such as outdoor construction, should avoid rain, snow, fog, humidity, wind and other adverse climatic conditions.
 

Safety Matters

1. Proper ventilation of the construction site;
2. Fireworks are strictly prohibited in the construction site and adjacent areas;
3. Use explosion-proof electrical equipment;
4. Metal impact is strictly prohibited;
5. Prevent static accumulation;
6. Wear necessary protective equipment;
7. Avoid inhaling paint mist, avoid skin contact with paint and thinner, etc;
8. If the eyes are accidentally splashed with paint, wash with plenty of water and seek medical attention;
9. Properly dispose of empty paint drums and remaining paint to avoid environmental pollution;
10. Take all other necessary safety and fire control measures according to the specific situation on the scene.
 

Sharing Photos