Yellow Chlorinated Rubber Topcoat with Good Low Temperature Construction Performance for Container Anticorrosion

• Customization: Available
• Color: Medium Yellow
• Appearance: Liquid
• Model NO.: Chlorinated Rubber-top. my. 2
• Main Raw Material: Chlorinated Rubber
• Method: Spray
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO9001, ISO9000
• Substrate: Steel
• Components: Aluminum Slurry / Anti-Rust Pigment
• Formation Mechanism: Non Conversion Type
• Painting Method: Spray / Roller / Brush
• Substrate Temperature: Greater Than 3ºC
• Serviceable Temperature: Minus20ºC - 50ºC
• Storage Life: 1 Year
• Transport Package: Barrel
• Specification: 20KG
• Trademark: Ayrood
• Origin: Jining, Shandong, China
• Production Capacity: 5000tons/Year

Product Description

Yellow Chlorinated Rubber Topcoat with Good Low Temperature Construction Performance for Container Anticorrosion

 

Design  Usage

It is used to prevent corrosion of ships, port facilities, bridges, steel structures, chemical equipment, containers and cement buildings, so as to protect them from the erosion of the atmosphere, seawater and chemical gases and other media, so as to extend the service life of objects.

Design  Feature

 

1. Anticorrosive and Antioxidant;

2. Acid and Alkali Resistance Salt Fog Resistance;

3. Strong Adhesion;

4. Good Supporting Facilities;

5. Quick Drying of Paint Film Curing at Room Temperature; 

 

 

 

Product Composition

Chlorinated rubber + aluminum pulp + rust pigment + additive + solvent, etc.
 

Construction Parameter

 

Flash point	38ºC
Theoretical dosage	Thick slurry type	240g/m^2
	Non-thick slurry type	120g/m^2
Wet Film Thickness (WFT)	Thick slurry type	120pm
	Non-thick slurry type	80µm
Dry Film Thickness (DFT)	Thick slurry type	85pm
	Non-thick slurry type	50µm
Drying Time (At 25ºC)	Surface Dry	2h
	Actual Dry	8h

Re-coating Interval

 

Temperature	0ºC	20ºC	30ºC
Shortest re-coating interval	24h	8h	6h
Longest re-coating interval	no limited

 

Decorate Method

 

Airless spraying	Diluent	101diluent
	Dilution Amount	0-5% (Calculated by weight of paint)
	Nozzle Diameter	0.4-0.5mm
	Ejection pressure	15-20MPa (About 150-200kg/cm^2)
Air Spraying	Diluent	101diluent
	Dilution Amount	0-10% (Calculated by weight of paint)
	Nozzle Diameter	2.0-3.0mm
	Air pressure	0.3-0.4MPa (About 3-4kg/cm^2)
Roller / Brush	Diluent	101diluent
	Dilution Amount	0-3% (Calculated by weight of paint)
	Cleaning Agents	101 special diluent

Notice! ! !
1. Roller coating and high pressure airless spray paint must be fully stirred before use, so that the paint of the whole bucket is uniform, no precipitation, no color difference.
2. Chlorinated rubber paint cannot be mixed with conventional paint.
 

Matching Paint

 

Front matching primer (It can be directly painted on the rust removal steel plate)	Epoxy zinc rich primer
	Epoxy iron red primer
	Inorganic zinc silicate metal protective primer
Back matching topcoat	Chlorinated rubber various color topcoat

Notice! ! !
The substrate temperature must be 3ºC above the dew point.
 

Safety Matters

1. Proper ventilation of the construction site;
2. Fireworks are strictly prohibited in the construction site and adjacent areas;
3. Use explosion-proof electrical equipment;
4. Metal impact is strictly prohibited;
5. Prevent static accumulation;
6. Wear necessary protective equipment;
7. Avoid inhaling paint mist, avoid skin contact with paint and thinner, etc;
8. If the eyes are accidentally splashed with paint, wash with plenty of water and seek medical attention;
9. Properly dispose of empty paint drums and remaining paint to avoid environmental pollution;
10. Take all other necessary safety and fire control measures according to the specific situation on the scene.
 

Company Profile

Price Description

Certificates